
Güvenilir filtrasyon doğrulanmış özelliklerle başlar.
Hava kompresörü yağı 2116010168
Air180 Filtre Elements yedek element
Hava kompresörü filtre elemanları
2116010168 Vida Hava Kombinasyonu Petrol-Gas Kırık Element (Genel olarak değiştirilebilir endüstri numarası OS-1313) yüksek verimli, hassas temel filtre bileşeni için özel olarak orta düzeyde tasarlanmış orta seviye filtre bileşenidir
Siparişler fiyat, uyumluluk ve teslimat için ekibimiz tarafından onaylanmıştır.
Güvenilir seçim için doğrulanmış özellikler.
Ekipman manuel veya orijinal dokümanlara karşı yükleme gerekliliklerini onaylayın.
| Yükseklik | 307 mm |
|---|---|
| Çapı İç | 213 mm |
| Dış çap | 355 mm |
| Ağırlık | 10 kg |
| Çalışma sıcaklığı | 120°C |
| Filtrasyon hassasiyeti | 0.1 μm |
| İlk baskı | ≤ 0.2 bar |
2116010168 Screw Air Compressor Oil-Gas Separator Element (the general interchangeable industry number is OS-1313) is a high-efficiency, precision core filter component specially designed for medium and large screw air compressors. This product is mainly used in air compressor systems with a power rating of 55KW (75 HP) (such as well-known models including SA55-C and SF55-C). It is installed inside the oil-gas separator tank and undertakes the critical task of thoroughly separating compressed air from lubricating oil.
Core Selling Points and Core Advantages
• Ultra-clean Exhaust (≤ 3 ppm)
Adopting multi-layer precision coalescing filtration technology, it can control the residual oil mist concentration in the delivered compressed air within 3 ppm (parts per million). It supplies high-quality clean air for post-processing equipment and protects downstream air-consuming terminals and pneumatic components.
• Imported High-efficiency Filter Media (HV Glass Fiber)
The core filtration layer uses ultra-fine glass fiber manufactured by HV (Hollingsworth & Vose), USA. Featuring high porosity and good air permeability, this material delivers outstanding coalescing and capturing performance for micron and nanoscale oil droplets.
• Low Energy Consumption Design (Initial Pressure Drop ≤ 0.2 bar)
The elaborately engineered physical structure creates minimal resistance to compressed air flow. A low initial pressure drop means the air compressor main unit does not consume extra electric power to overcome filter element resistance, helping enterprises cut electricity costs significantly during long-term operation.
• Dual Electrostatic Safety Protection
Static electricity tends to accumulate easily under the high-flow and high-friction operating conditions of air compressors. Built-in metal conductive static pins/conductive strips at the flange and gasket of this product promptly conduct accumulated static electricity to the equipment ground, effectively eliminating the risk of internal flash explosion.
• Heavy-duty Reinforced Support Frame
Both the inner and outer support frames are made of thick perforated carbon steel with anti-corrosion treatment. It offers a large flow area and excellent pressure-difference resistance. The filter element will not deform, collapse or blow through even under transient system pressure fluctuations or heavy-load working conditions.
Kurulum Notları
Installation Instructions: When replacing, make sure the asbestos sealing gasket is properly installed, and the static lead-out device (conductive pin) must be in close contact with the metal surface of the oil-gas separator tank.
Bakım & Değiştirin
Standard service life: Under working conditions with clean intake air and high-quality oil, the design service life is 3000 ~ 4000 hours. • Replacement based on pressure difference: Do not use it beyond the service life blindly. Shut down the machine immediately for replacement when the control panel indicates that the pressure difference reaches 0.8 - 1.0 bar. Operation beyond the service life will lead to higher exhaust temperature, increased oil carryover (oil leakage), and even burnout of the motor due to overload.
Sipariş almadan önce sipariş almadan önce
Orta, akış oranı, basınç, sıcaklık, bağlantı ve mevcut yükleme alanı onaylayın.
Teslimat Seçenekleri
Kargo veya hizmet noktası toplanıyor. Ekibimiz varış, ağırlık ve liderlik süresine dayanan en iyi düzenlemeyi onaylar.
Depatch Önce Onaylandı
Soruşturmadan sonra, teslimattan önce özellikleri, fiyat ve tedarik durumunu doğrulıyoruz.
Devam Eden Destek
Tanımlama, yükleme veya kalite soruları için, bize ulaşınca ürün ve sipariş bilgilerini tut.
INQUIRYBu ürün için bir soruşturma gönderin
Send your requirements for 2116010168 and our selection team will confirm compatibility, price and lead time.
Seçici Kaynaklar
Need help confirming 2116010168 or comparing it with another reference? Use these selection resources before ordering.



