
Güvenilir filtrasyon doğrulanmış özelliklerle başlar.
Hava Yağı 63760.0
Air180 Filtre Elements yedek element
Hava kompresörü filtre elemanları
Part number 6.3760.0 is an air oil separator core for screw air compressors. Its main function is to separate lubricating oil from the discharged compressed air, so as to ensure clean output gas and m
Siparişler fiyat, uyumluluk ve teslimat için ekibimiz tarafından onaylanmıştır.
Güvenilir seçim için doğrulanmış özellikler.
Ekipman manuel veya orijinal dokümanlara karşı yükleme gerekliliklerini onaylayın.
| Yükseklik | 525 mm mm |
|---|---|
| Dış çap | 274 mm |
| En Büyük Dış Çapı | 328 mm |
| Çapı İç | 210 mm |
| Ağırlık | 9.42 |
| Filtrasyon hassasiyeti | 0.3 μm |
| Seal Material | Fluorubber (VITON) Oring |
Part number 6.3760.0 is an air oil separator core for screw air compressors. Its main function is to separate lubricating oil from the discharged compressed air, so as to ensure clean output gas and maintain the efficient circulation of lubricating oil within the compressor system.
Temel Çalışma Prensibi
During the operation of the screw air compressor, lubricating oil is injected into the main unit for cooling and sealing, so the discharged compressed air contains a large amount of oil mist.
1. Primary Separation: After the oil-gas mixture enters the oil-gas tank, mechanical separation is realized through mechanical rotation and collision. Approximately 99% of the liquid oil settles.
2. Fine Separation: The remaining micron-sized oil mist passes through the 6.3760.0 filter element along with the air. Relying on the coalescence, collision and interception effects of high-density glass fibers, the oil mist converges into large oil droplets on the surface of the filter element, flows to the bottom under the action of gravity, and returns to the main unit for recycling through the oil return pipe; clean compressed air is discharged through the inside of the filter element.
Core Ürün Avantajları
• Ultra-low oil carryover in exhaust: Adopts imported high-density borosilicate glass fiber composite material. Fine layered filtration strictly controls residual oil content in the final exhaust below 3 PPM (parts per million), preventing oil contamination of downstream precision pneumatic components and production lines.
• Low pressure drop and energy saving: The optimized air flow channel design delivers extremely low initial resistance (pressure drop). This allows the air compressor to operate without overcoming excessive resistance, substantially cutting the operating energy consumption and electricity costs of the equipment.
• Robust high-pressure explosion-proof frame: The inner and outer support screens are made of thickened high-strength stainless steel or electroplated anti-corrosion steel plates with high-temperature-resistant spiral lock-seam technology. It can withstand an instantaneous high pressure differential of up to 5 bar (approximately 0.5 MPa), avoiding oil blow-by accidents caused by filter element collapse or puncture under sudden heavy loads or clogging conditions.
• Excellent static dissipation design: Static conduction devices are integrated inside the filter element and at the flange. In dry environments where static electricity is readily generated by high-speed air friction, accumulated static charges can be safely diverted to the system ground wire to prevent static sparks and eliminate explosion and combustion risks inside the oil-gas tank.
• High-standard sealing protection: Equipped with supporting high-temperature and corrosion-resistant special Viton or nitrile rubber gaskets, ensuring a tight, leak-free seal even after long-term immersion in lubricating oil under high pressure and high temperature (up to 120°C).
Kurulum Notları
1.It is strictly forbidden to remove the "metal static pin" on the flange gasket 2.Thoroughly clean the flange sealing interface 3.Precisely align and check the length of the "return oil pipe" 4.Inspect and clean the "oil return check valve" 5.Flange bolts must be tightened diagonally and evenly. 6.Maintain absolute cleanliness of operations and conduct inspections
Bakım & Değiştirin
Replacement Cycle: The designed service life is 3,500 to 6,000 operating hours under standard working conditions. • Early replacement alert: Replace the entire set immediately when the air compressor control panel triggers an oil separation pressure drop alarm (typically when the pressure drop reaches 0.8–1.2 bar), or when obvious oil carryover or excessive oil content is detected in the downstream air supply pipeline.
Sipariş almadan önce sipariş almadan önce
Orta, akış oranı, basınç, sıcaklık, bağlantı ve mevcut yükleme alanı onaylayın.
Teslimat Seçenekleri
Kargo veya hizmet noktası toplanıyor. Ekibimiz varış, ağırlık ve liderlik süresine dayanan en iyi düzenlemeyi onaylar.
Depatch Önce Onaylandı
Soruşturmadan sonra, teslimattan önce özellikleri, fiyat ve tedarik durumunu doğrulıyoruz.
Devam Eden Destek
Tanımlama, yükleme veya kalite soruları için, bize ulaşınca ürün ve sipariş bilgilerini tut.
INQUIRYBu ürün için bir soruşturma gönderin
Send your requirements for 6.3760.0 and our selection team will confirm compatibility, price and lead time.
Seçici Kaynaklar
Need help confirming 6.3760.0 or comparing it with another reference? Use these selection resources before ordering.



