
Güvenilir filtrasyon doğrulanmış özelliklerle başlar.
Air/Oil Separator KV360-003
Air180 Filtre Elements yedek element
Hava kompresörü filtre elemanları
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as
Siparişler fiyat, uyumluluk ve teslimat için ekibimiz tarafından onaylanmıştır.
Güvenilir seçim için doğrulanmış özellikler.
Ekipman manuel veya orijinal dokümanlara karşı yükleme gerekliliklerini onaylayın.
| OEM / Cross Referans | 6.1965.0, 6.2013.0, 6.4024.0,49 000 50 321, 49 000 51 321, 49 004 52 101, 49 004 52 102, 49 004 53 102,P52-5203, P53-0757P52-5203 , P53-0757 |
|---|---|
| Yükseklik | 450 mm |
| Dış çap | 275 mm |
| Çapı İç | 219 mm |
| Ağırlık | 8.3 kg |
| Flang Dış Çapı | 328 mm |
| Filtrasyon derecesi | 0.1 mm |
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as original filters of many mainstream brands, it is used to efficiently separate lubricating oil mist from compressed air, ensure the clean operation of the pneumatic system and reduce oil consumption.
Structural and Material Features
• High-quality filter media.
The interior is wound with multiple layers of uniformly graded borosilicate glass microfiber. It features high dust holding capacity and low initial pressure drop (approximately 0.14–0.20 bar), which helps reduce the energy consumption of the air compressor.
• High-strength support structure.
Equipped with high-strength, rust-proof perforated inner and outer metal support screens and galvanized end caps. It can withstand pressure differential shocks up to 5 bar (70 psi) without collapse or deformation.
• Non-porous flange sealing design.
The top flange adopts a non-porous flat flange structure (outer diameter approx. 324–328 mm, total height approx. 450 mm), which is sealed by direct compression against the top cover of the oil-gas separation tank. Two oil-resistant sealing gaskets with conductive metal pins are usually supplied with the unit. They can naturally dissipate static electricity generated during filter operation after installation to ensure equipment safety.
Kurulum Notları
Sistemi durdurun ve kaldırmadan önce baskıyı bırakın. Yüklemeden önce akış yönünü ve yalıtım yüzeylerini onaylayın.
Bakım & Değiştirin
Basınç damlasına veya bakım programına göre değiştirin. Sığınma ve mühür hasarları.
Sipariş almadan önce sipariş almadan önce
Orta, akış oranı, basınç, sıcaklık, bağlantı ve mevcut yükleme alanı onaylayın.
Çapraz referans
Bu ürünle ilişkili referans bilgileri. Bize bir çapraz-reference numarasını doğrulamaya yardımcı olmanız gerekiyorsa.
Teslimat Seçenekleri
Kargo veya hizmet noktası toplanıyor. Ekibimiz varış, ağırlık ve liderlik süresine dayanan en iyi düzenlemeyi onaylar.
Depatch Önce Onaylandı
Soruşturmadan sonra, teslimattan önce özellikleri, fiyat ve tedarik durumunu doğrulıyoruz.
Devam Eden Destek
Tanımlama, yükleme veya kalite soruları için, bize ulaşınca ürün ve sipariş bilgilerini tut.
INQUIRYBu ürün için bir soruşturma gönderin
Send your requirements for KV360-003 and our selection team will confirm compatibility, price and lead time.
Seçici Kaynaklar
Need help confirming KV360-003 or comparing it with another reference? Use these selection resources before ordering.



