
Güvenilir filtrasyon doğrulanmış özelliklerle başlar.
Oil Element B00670077002727
Air180 Filtre Elements yedek element
Hava kompresörü filtre elemanları
B006700770027 Petrol Bağımlı Filtre, büyük petrol destekli vida hava kompresörleri için özel olarak tasarlanmış petrol-gaz ayrılık bileşeni inşa edilmiştir. Hava yoldaşının petrol-gaz ayrılık tankına monte edildi
Siparişler fiyat, uyumluluk ve teslimat için ekibimiz tarafından onaylanmıştır.
Güvenilir seçim için doğrulanmış özellikler.
Ekipman manuel veya orijinal dokümanlara karşı yükleme gerekliliklerini onaylayın.
| Yükseklik | 304.8 mm |
|---|---|
| Dış çap | 274.6 mm |
| Çapı İç | 200.2 |
| Filtrasyon derecesi | 0.0 ~ 0.03 μm |
| Ağırlık | 7.72 kg |
| Flang Dış Çapı | 355.6 mm |
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air compressor, it is responsible for deeply intercepting and separating the lubricating oil mist carried in the airflow before the compressed air enters the aftercooler and the gas consumption end, ensuring the cleanliness of downstream compressed air and realizing the recycling of lubricating oil.
Core Ürün Özellikleri
• High-precision deep filtration.
Adopting multi-layer superfine fiberglass composite filter media, it can effectively capture oil-aerosol particles at the level of 0.01 ~ 0.03 μm. The filtration efficiency reaches over 99%, ensuring the oil content in exhaust gas is controlled at ≤ 3 ppm.
• Low pressure differential energy-saving design.
The optimized pleated filter layer structure and high-permeability support net greatly reduce air flow resistance, with an initial pressure differential of only ≤ 0.02 MPa (approx. 0.2 bar), helping cut energy consumption loss during the loaded operation of air compressors.
• High-strength explosion-proof and pressure-resistant structure.
The inner and outer protective screens are made of high-strength galvanized carbon steel perforated plates. Combined with oil-resistant high-temperature end caps and special adhesives, it can withstand a maximum working pressure of 10 bar and scouring by high-temperature oil and gas, preventing the filter element from deforming or collapsing under high pressure differential.
• Static dissipation safety protection.
The flange plate is equipped with conductive gaskets or anti-static pins, which can promptly conduct static charges generated by high-speed friction of oil mist to the oil-gas tank shell, eliminating the risk of static sparks in the oil-gas mixed environment.
Kurulum Notları
Sistemi durdurun ve kaldırmadan önce baskıyı bırakın. Yüklemeden önce akış yönünü ve yalıtım yüzeylerini onaylayın.
Bakım & Değiştirin
Basınç damlasına veya bakım programına göre değiştirin. Sığınma ve mühür hasarları.
Sipariş almadan önce sipariş almadan önce
Orta, akış oranı, basınç, sıcaklık, bağlantı ve mevcut yükleme alanı onaylayın.
Teslimat Seçenekleri
Kargo veya hizmet noktası toplanıyor. Ekibimiz varış, ağırlık ve liderlik süresine dayanan en iyi düzenlemeyi onaylar.
Depatch Önce Onaylandı
Soruşturmadan sonra, teslimattan önce özellikleri, fiyat ve tedarik durumunu doğrulıyoruz.
Devam Eden Destek
Tanımlama, yükleme veya kalite soruları için, bize ulaşınca ürün ve sipariş bilgilerini tut.
INQUIRYBu ürün için bir soruşturma gönderin
Send your requirements for B006700770027 and our selection team will confirm compatibility, price and lead time.
Seçici Kaynaklar
Need help confirming B006700770027 or comparing it with another reference? Use these selection resources before ordering.



