
Güvenilir filtrasyon doğrulanmış özelliklerle başlar.
Air Oil Separator Part 72-12302-0801-23
Air180 Filtre Elements yedek element
Hava kompresörü filtre elemanları
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air
Siparişler fiyat, uyumluluk ve teslimat için ekibimiz tarafından onaylanmıştır.
Güvenilir seçim için doğrulanmış özellikler.
Ekipman manuel veya orijinal dokümanlara karşı yükleme gerekliliklerini onaylayın.
| Yükseklik | 445 mm |
|---|---|
| Dış çap | 115 mm |
| Çapı İç | 76 mm |
| Ağırlık | 2.5 kg |
| Filtrasyon derecesi | 0.1 μm |
| OEM / Cross Referans | KD120-051,SA463MY |
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air and the oil circuit circulation of the unit.
Core Advantages and Value
• Reduced oil consumption.
The residual oil content of the exported compressed air is controlled within 1~3 ppm, which significantly cuts lubricating oil loss and replenishment costs.
• Energy saving and consumption reduction.
Low initial pressure difference (≤ 0.02 MPa) and low airflow resistance help reduce the operating power consumption of the air compressor.
• Protection of downstream equipment.
It effectively prevents oil from entering dryers, precision filters and pneumatic actuators, extending the service life of the entire air source system.
Core Structure and Materials
• Multi-layer ultra-fine glass fiber filter media.
Imported composite glass fiber is adopted as the core filtration layer, featuring high dust holding capacity and oil mist capture efficiency, which can effectively intercept tiny oil droplets at the 0.1-micron level.
• High-strength rust-proof frame.
High-strength perforated metal support meshes are fitted on both inner and outer layers to withstand instantaneous pressure fluctuations during unit start-stop, loading and unloading, preventing the filter element from deformation or breakdown.
• Anti-static sealing design.
High-temperature resistant sealing gaskets and anti-static flow guide pieces (or conductive pins) are equipped on the flange end cover to avoid static accumulation caused by friction of high-speed airflow and improve the operation safety inside the oil-gas separation tank.
Kurulum Notları
Sistemi durdurun ve kaldırmadan önce baskıyı bırakın. Yüklemeden önce akış yönünü ve yalıtım yüzeylerini onaylayın.
Bakım & Değiştirin
Basınç damlasına veya bakım programına göre değiştirin. Sığınma ve mühür hasarları.
Sipariş almadan önce sipariş almadan önce
Orta, akış oranı, basınç, sıcaklık, bağlantı ve mevcut yükleme alanı onaylayın.
Teslimat Seçenekleri
Kargo veya hizmet noktası toplanıyor. Ekibimiz varış, ağırlık ve liderlik süresine dayanan en iyi düzenlemeyi onaylar.
Depatch Önce Onaylandı
Soruşturmadan sonra, teslimattan önce özellikleri, fiyat ve tedarik durumunu doğrulıyoruz.
Devam Eden Destek
Tanımlama, yükleme veya kalite soruları için, bize ulaşınca ürün ve sipariş bilgilerini tut.
INQUIRYBu ürün için bir soruşturma gönderin
Send your requirements for 72-12302-0801-23 and our selection team will confirm compatibility, price and lead time.
Seçici Kaynaklar
Need help confirming 72-12302-0801-23 or comparing it with another reference? Use these selection resources before ordering.



